The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

47 Fasttoys · 09-14-2013, 05:18 AM

By all means post away, worked on filling the remaining holes in the firewall and the frame work for kick panel and floor, installed floor plate. I will be going back and finishing the firewall later after remaining mods are complete. You can see the COE has other access doors under the seat. These where for air filter service and rear shifter hook up service. The battery was under another door the same as the pick-up but was removed as part of the main removable floor sections (3). The area under the floor may end up being the location for the gas tank, not sure. By the time you stick a radiator and electric in the front end there's not a whole lot of room in the engine bay.

09-14-2013, 05:18 AM	#13
47 Fasttoys Registered User Join Date: Sep 2013 Location: Westminster, SC Posts: 933	Re: Loadmaster '47 COE By all means post away, worked on filling the remaining holes in the firewall and the frame work for kick panel and floor, installed floor plate. I will be going back and finishing the firewall later after remaining mods are complete. You can see the COE has other access doors under the seat. These where for air filter service and rear shifter hook up service. The battery was under another door the same as the pick-up but was removed as part of the main removable floor sections (3). The area under the floor may end up being the location for the gas tank, not sure. By the time you stick a radiator and electric in the front end there's not a whole lot of room in the engine bay.