The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

RLTW375 · 09-27-2013, 09:43 PM

It's cool I am stuck at work for the night. The tank cam with the fittings installed but to me it looks like they are threaded into the polymer and then clamped.

Looks like I have the belts set up the same way.

I haven't had much luck with the first set of plates I got, and returned them to summit. I got to talking to a local guy at a local parts shop and showed him some of my pics and he's said I was practicall good to go. Just use the original bracket on the back left (driver side) of the carb bolt. So here's what I can up with...

Posted via Mobile Device

09-27-2013, 09:43 PM	#71
RLTW375 Registered User Join Date: Oct 2010 Location: Tri-Cities, WA Posts: 95	Re: FNG 72 K5 CST Project It's cool I am stuck at work for the night. The tank cam with the fittings installed but to me it looks like they are threaded into the polymer and then clamped. Looks like I have the belts set up the same way. I haven't had much luck with the first set of plates I got, and returned them to summit. I got to talking to a local guy at a local parts shop and showed him some of my pics and he's said I was practicall good to go. Just use the original bracket on the back left (driver side) of the carb bolt. So here's what I can up with... Posted via Mobile Device __________________ 72 CST Blazer 4x4 (Revival in progress) http://67-72chevytrucks.com/vboard/s...d.php?t=430968 Last edited by RLTW375; 09-27-2013 at 09:50 PM.