The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

TATTOO2131 · 10-02-2013, 03:26 PM

track width meaning the width of the outside of the tire the is only a small difference. On the stock front/rear end the outside of the tires measured 73" On the Crown Vic front/rear end the tires I am running are 75" to the outside, only adding 1 inch per side. The vic is a wider set up but has a positive inset on the rims I will be running 20" x 10" on the rear and 20: x 8.5" on the front plus I dropped frame 6" inches in the front and almost 10 in the back with airbags. I am attaching more of the most recent photos with the tilt front end etc.

10-02-2013, 03:26 PM	#11
TATTOO2131 Registered User Join Date: Jul 2013 Location: brookings Posts: 52	Re: 65 panel crown vic front end swap update track width meaning the width of the outside of the tire the is only a small difference. On the stock front/rear end the outside of the tires measured 73" On the Crown Vic front/rear end the tires I am running are 75" to the outside, only adding 1 inch per side. The vic is a wider set up but has a positive inset on the rims I will be running 20" x 10" on the rear and 20: x 8.5" on the front plus I dropped frame 6" inches in the front and almost 10 in the back with airbags. I am attaching more of the most recent photos with the tilt front end etc.