Quote:
Originally Posted by EPS3
I've read the primary difference beween 67-72 control arms and 73-87 control arms is the steel bushings were replaced with rubber bushings. The rubber bushings are softer for a smoother, but less controlled ride. Most tubular control arms use urethane, delrin, or other hard plastic bushings. I was also told that 73-87 control arms could be mounted on a 67-72 C10.
Can someone tell me why would Ridetech need to develop a different set up for the 73-87 C10?
Thanks
|
we also use delrin with 13% teflon bushings in our new control arms