|
Re: Trouble codes
Quote:
Originally Posted by Hart_Rod
Are you happy with the drivability? Idle? When you had the bad pedal, would it start and idle?
|
I'd have to go back and re-read my notes...can't remember for sure but think it wasn't starting. My motor isn't as big at 6.0L but with this cam is running 50# Chrysler injectors. I still need to install the injectors I got from you.
As far as the cam...its been great with this motor though it made more vacuum when it was carb'd. The idle is lightly lopey/choppy and it jumps when I hit the go pedal. 
The HPTuners will help you identify problems with the scanner then correct them with the editor. Plus with the forum communities....a lot of folks running HPT (and some running boost) will be willing to look over your scans and tune...and make suggestions. Some may actually be helpful.
__________________
Kurt -
'68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy
'72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close
'06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD
'18 Kia Sorento - wife's econo-driver
'95 Chevy S10 - reg cab shortbed, LS, 4.3, auto...
my '68's powertrain and chassis build -links broken
A surprise phase - carb to efi -links broken
|