[OrrieG]

Here is the modification to the ac vent. It came out of an 09 Mustang, about 2 7/8" OD. AC hose is 2.5" ID. It was also too long for the hose to bend without crimping. It is abs, so I cut it down and used a sewer coupling and piece of pipe as a reducer. Both required taking out about 1/4" to reduce the diameter. Bottom is stock, top modified.

Still fighting getting the correct lamp sockets for the courtesty lights. NAPA is on try two, will be here in a week or so. If its a direct replacement will post the number for all to use. Also got my taillight leds but they sent 1156 single filament instead of 1157 dual advertised to have to wait on that too.