Quote:
Originally Posted by 79Betty
Sorry i can't edit pic's everyone but can only take. The black wire from the resistor? Has purple, blue red wires. I can take it and ground it to a fender bolt hole and hear it "Click" like it kicking on. But still can't tell if the motor is turning. Also i have hot hoses now!! Found that out the hard way lol i mean this wire.
|
The click you hear is the relay making contact and not the motor. Go ahead and connect that to the firewall with a screw. A clean, new screw that way you will have a good ground. Also from that screw attach another ring terminal with an ##12 wire crimped to it with another smaller ring terminal on the other end of that wire. Then remove one of the mounting screws from your blower motor and rough up and sand the paint off under it. Then replace the screw with the ring terminal in it. The ring terminal should be making a good ground the the blower motor through the roughed paint. This should solve your problem.