Quote:
Originally posted by '68 K-10
well the cab that i took off from my 4x4 frame is bolted but it doesnt appear to be any higher than my 2wheel drive. is it possible to cut out a low hump and weld in a high hump
|
th 2 wheel drive 1/2 ton has smaller cab mounts. The 3/4 ton and one ton trucks have tall mounts, as do all 4X4s.
The high hump is in fact a bolt in on most all cabs. (never seen a weld in...but I have heard of it) Cut out the low hump, leaving an inch or so to bolt the new one to, and then blot it in with some kind of sealer to keep the water and crap out. The Right Stuff would work great...just don't expect it to come out very easily.