[COS399]

Slow progress in the last week. I got my new TCI deep transmission pan and finally got it installed. In order to drop the old pan I had to remove the cross member and mount. While I was at I went ahead and replaced the mount with a new one. The last two days have been frustrating trying to modify the transfer case shifter lever to work now that the transmission has been moved back 4 1/4" due to the 4L80 being longer than the TH400. After numerous failed attempts and countless hours wasted at trying to make the shifter work in the original location, I finally decided to move the hole in the floorboard over. I am attaching pictures of the before and after pictures of the TC shifter lever. My drive shafts came back from the shop and I got the rear ones installed. I was waiting to finish the TC shift lever done before installing the front shaft.