The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

LS-K · 01-31-2014, 04:04 AM

LS1NOVA,

I have already bought about 20ft of stainless braided TEFLON line with a bunch of hose ends for that stainless line. would the FI clamps work with the stainless line?

Double Flaring seems to be a safer bet, but I dont think I have enough line coming out of the sending unit to work with, unless you believe its enought to double flare. Also, will those double flare fittings directly bolt on to the stainless hose ends?

01-31-2014, 04:04 AM	#42
LS-K Registered User Join Date: Dec 2013 Location: Tucson, AZ Posts: 107	Re: '87 tank/fuel pump supplier LS1NOVA, I have already bought about 20ft of stainless braided TEFLON line with a bunch of hose ends for that stainless line. would the FI clamps work with the stainless line? Double Flaring seems to be a safer bet, but I dont think I have enough line coming out of the sending unit to work with, unless you believe its enought to double flare. Also, will those double flare fittings directly bolt on to the stainless hose ends? Last edited by LS-K; 01-31-2014 at 04:05 AM. Reason: SPELLING