|
Re: Drive Shaft install question
If those springs are lift springs like they look like they are, they can be in backwards and there is a difference of about two inches where the center pin is on the spring to love the axle Back two inches. Check that as well. The slip yoke is definitely All the way in in the pic you posted. It may be possible you have a shortbes driveshaft there. Looks exact To the blazer but a few inches longer. You need to get that one cut or a new One made to center on the slip yoke between open and closed. The other one in the last pic with the cv is your front shaft.
__________________
72 3/4 ton blazer. 5 inch lift on 35 inch tires. 355 corvette engine with crane roller rockers, rv cam, edelbrock carb and intake with one inch spacer. Thrush Headers with flowmaster 40 duels. 4speed sm465 manual. 4 wheel disk brakes with Inboarded rear shock prerunner style mounts and shocks.
|