The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

STOCKISH · 02-20-2014, 08:20 PM

If you are asking the distance between the lower control arms they are 24 1/4 from center of the bolt to center of the bolt. Thats the only measurement I can see that is cut off, sorry about that. As for the upper control arm mount I just layed that template you see in post 102 on the 1/2 plate and traced it out.

Mike, Yeah Im pumped about the LS for sure. Now if I could just unload this 292!

02-20-2014, 08:20 PM	#110
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: 1954 3100 C4 Tube Chassis Build If you are asking the distance between the lower control arms they are 24 1/4 from center of the bolt to center of the bolt. Thats the only measurement I can see that is cut off, sorry about that. As for the upper control arm mount I just layed that template you see in post 102 on the 1/2 plate and traced it out. Mike, Yeah Im pumped about the LS for sure. Now if I could just unload this 292! __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.