The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

STOCKISH · 02-21-2014, 10:46 PM

Made a little progress tonight, I made a simple jig to ensure my lower control arm mounts stay nice and square while I burn them in. They are 1" diameter
.250 wall tool steel so hopefully they will be strong enough. I will either add a couple gussets or put a piece of 2" .500 wall DOM over them and weld them on as well. What are your guys thoughts?

02-21-2014, 10:46 PM	#113
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: 1954 3100 C4 Tube Chassis Build Made a little progress tonight, I made a simple jig to ensure my lower control arm mounts stay nice and square while I burn them in. They are 1" diameter .250 wall tool steel so hopefully they will be strong enough. I will either add a couple gussets or put a piece of 2" .500 wall DOM over them and weld them on as well. What are your guys thoughts? Attached Images __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.