The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 1994 LT1 wiring in 53 Chevy 5 window pickup

**VetteVet** · 03-13-2014, 01:06 PM

What you are doing is complicated depending on what wiring harness you are mating with the LT1. For instance, the fuel system, the ignition, (opti-spark), the charging system, the dash instrumentation, vehicle lighting, etc. Notwithstanding the fact that the 53 is still six volts. ( I believe ).

Try reading this thread which is similar to yours. It's just down from yours on the same page labeled "Backfeed" You might consider PM-ing the guy for input.

03-13-2014, 01:06 PM	#2
VetteVet Msgt USAF Ret Join Date: Jan 2005 Location: Kalamazoo, Michigan Posts: 8,709	Re: 1994 LT1 wiring in 53 Chevy 5 window pickup What you are doing is complicated depending on what wiring harness you are mating with the LT1. For instance, the fuel system, the ignition, (opti-spark), the charging system, the dash instrumentation, vehicle lighting, etc. Notwithstanding the fact that the 53 is still six volts. ( I believe ). Try reading this thread which is similar to yours. It's just down from yours on the same page labeled "Backfeed" You might consider PM-ing the guy for input. __________________ VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative.