Quote:
Originally Posted by orngsikL
Ive got the budget arms made for the dropmember. Their shafts cost $200. Moogs are $70.
I thought mine were coming with shafts when i bought them, but they did not.
I ordered the moogs. Each shaft came from a different vendor because noone has 2 in stock. Well one vendor sent me the offset shaft and one sent me the straight shaft. Just trying to figure out which one is better to use. Both have the same part number k6184.
|
You got the wrong shaft in the right box. I went through that when trying to get offset ones for mine. I had to send three back before getting two offset ones.
The advantage to the offset on is the additional camber you get without adding shims. I went from just a 2.5" drop spindle to the spindle plus one cut coil. I added the offset shafts and they didnt have to adjust the camber at all. Got lucky on that one....