The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 60-66 Stepside rear step bumper modification

murphy98 · 04-02-2014, 07:51 AM

Oh, by the way WhippinSaw, I see in your second photo above that your bumper has an upper hitch ball plate. Mine had the same setup but I chose to cut out the upper plate in order to allow my rear license plate to be mounted there as I did not like the original mounting on top of the bumper left side as shown in the 2nd photo below. Not saying you should do the same but something to consider. I forgot to mention that modification in my original write up.

04-02-2014, 07:51 AM	#31
murphy98 Registered User Join Date: Jan 2014 Location: Ontario, Canada Posts: 235	Re: 60-66 Stepside rear step bumper modification Oh, by the way WhippinSaw, I see in your second photo above that your bumper has an upper hitch ball plate. Mine had the same setup but I chose to cut out the upper plate in order to allow my rear license plate to be mounted there as I did not like the original mounting on top of the bumper left side as shown in the 2nd photo below. Not saying you should do the same but something to consider. I forgot to mention that modification in my original write up. Attached Images Last edited by murphy98; 04-02-2014 at 07:58 AM.