Been working on some other little things. I had posted a thread asking about smooth wiper cowls:
http://67-72chevytrucks.com/vboard/s...d.php?t=624790
Since the consensus is that most fit like crap, I decided to "spiffy" up my stock one. I also wanted to try and eliminate some of the debris (leaves, etc.) from falling through the cowl. This is one reason I was interested in the smooth cowl. Since I'm working with my stock one though, I decided to try adding some mesh screen to the under side. Here's a look at the cowl in stock form:
Top:
Bottom:
I also repaired a crack on the driver's side of the wiper cowl. I used JB Weld for plastic. I didn't think to take a before pic, but here's a glimpse of the bottom after I fixed it:
And this is what I used to repair the crack: