Quote:
Originally Posted by C4fivewindow
Looking good! I think my next project might have to be a burb...
|
Thanks C4five window. We looked for a long time and picked this one up near El Paso 10 years ago.
Quote:
Originally Posted by youngrodder
I learned that the seat riser will not come out without taking the wood out. The back is also spot welded. What I did was used a jig saw and cut the rear tab that runs the lenght of the riser off. Once I remove my wood I will reatach the back tab to the riser.
Good luck
Marc
|
Big thank you to Marc for his help on this one! You said the seat riser was hard to get out. Wow. The seat riser was the first part down the assembly line in 1948 and they must have built the truck around it.
I didn't want to take the rear floor out yet. Especially with so much support gone from the front. Could have braced it, could have started at the back on the floors. And even though we will not be using the plywood floor, I really did hate to cut this one. It is still really nice.
And just as Marc described, there was the tab / flange across the back spot welded to the cross support. I owe you one Marc!