The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

aknovaman · 07-23-2014, 10:48 PM

Testing Gen IV DBW cruise this week on my buddies e38 ecu 6.0L 4L60e jeep swap. I am using a 2007 suburban BCM and precision 20 turn pots to set the resistance values needed to simulate the steering wheel resistors. It only takes two wires from the BCM to the resistors. As of right now we are using mini 3 amp momentary toggle switches. There is almost zero current flow through any of the gm switches. More info to follow.

07-23-2014, 10:48 PM	#141
aknovaman Registered User Join Date: Aug 2013 Location: Tecumseh Posts: 355	Re: LS factory cruise control hook up Testing Gen IV DBW cruise this week on my buddies e38 ecu 6.0L 4L60e jeep swap. I am using a 2007 suburban BCM and precision 20 turn pots to set the resistance values needed to simulate the steering wheel resistors. It only takes two wires from the BCM to the resistors. As of right now we are using mini 3 amp momentary toggle switches. There is almost zero current flow through any of the gm switches. More info to follow.