Re: 48 Burb, bagged, 5.3, 20 year wait
Filled in between the two floor sections and on the box steel for a flat mounting surface for the fender.
Since the distance between the fenders is wider at the top than the bottom, we made a pattern from poster board. Wife found some at Hobby Lobby that had lines on the back. Probably overkill as we should have been able to get close enough with measuring. Anyway, made the pattern and traced that on the hump.
Close enough would be good enough since to finish that area I'll use a piece of 1" angle in 19 or 20 gauge then stretch to form a curved close out for any gap.
|