Re: Attempting my first build 72 K5
Steering Stabilizer question for you guys.. I ordered Skyjackers Stabilizer part# 9055, which says HD OEM Replacement Kit for 1972 k5 Blazer 4x4. (minus the brackets). It came with the bushings, nuts, and tapered studs..
The studs are different than the ones that where on there before. I don't know if that stabilizer was ever changed or was replaced with different hardware/brackets than original OEM.
Skyjackers instructions:
1. Install the supplied tapered stud into the OEM tie rod.
2. Install the supplied bushing & sleeve into the body and eye of the new skyjacker steering stabilizer & attach to the OEM axle bracket using the OEM hardware.
3. Install the supplied boot over the shaft end of the stabilizer & install the supplied bushing into the shaft end eye of the new stabilizer.
4. Mount the shaft end of the stabilizer to the new stud on the OEM tie rod.
When I removed my steering stabilizer the tapered stud was not inserted through the tie rod. It had a bracket that had to U-bolts holding it to the tie rod. The other tapered stud was bolted to the axle housing.
|