|
Re: 1986 C10 Rear Suspension with some Power
Make sure to get the weight at the actual ride height desired and with you in the seat. If you have not sourced rest springs, try to make a solid mount in their spot.
As far as ic.. mine is set to 58" in front of the rear tire and 5" off the ground. It works no issues at my power level with a 315/60/15 drag radial out of the hole. I just need to tighten the front. If that doesn't fix it spinning 5-10 feet out, I will raise it some.
__________________
------Motor---------------Bottle
60'---1.53---------------1.41
1/8---6.58 @ 105.92----5.87 @ 118.41
1/4---10.38 @ 126.97----9.24 @ 142.49
|