The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

vannatta20 · 09-29-2014, 07:46 PM

I used a explorer rear but its too narrow. It will require deep dish wheels or 2 inch spacers on each end. I used 2 inch spacers that convert the bolt pattern back to 5x5.

09-29-2014, 07:46 PM	#151
vannatta20 Registered User Join Date: Oct 2011 Location: Las Vegas, NV Posts: 290	Re: 1968 C10 5.3 swap, the easy way. I used a explorer rear but its too narrow. It will require deep dish wheels or 2 inch spacers on each end. I used 2 inch spacers that convert the bolt pattern back to 5x5.