Quote:
Originally Posted by asizemore
Bolted everything up and sat her on the ground to check clearances and what not. Drivers side is approx. 1 inch lower than the passenger side..weird Still have a lot of work to do. More brake line work, install brake booster/master cylinder, and tighten up a few things here and there.
|
Did you investigate why it was sitting high/low on one side? I'd check that the front spring pig-tail is in the lower control arm pocket on both sides. If it isn't, you might be able to use a spring compressor to squeeze the one that is not seated properly and move it without popping a ball joint. I wish you luck! The truck is looking great!