The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Cheyenne75 · 10-25-2014, 08:24 PM

I just pulled the gauges out of my '48. There is 4 nuts evenly spaced on each gauge that will need to be removed. It's a little tricky removing the inner 4 of the 8 nuts between both gauges. The wiper motor, dash brace, and steering column are all in the same space. I'm not sure how the Dolphin gauges are held in the dash, might have to fab a few tabs to hold the in place.

10-25-2014, 08:24 PM	#2
Cheyenne75 Registered User Join Date: Feb 2012 Location: Ceres, Ca Posts: 14	Re: Gauges I just pulled the gauges out of my '48. There is 4 nuts evenly spaced on each gauge that will need to be removed. It's a little tricky removing the inner 4 of the 8 nuts between both gauges. The wiper motor, dash brace, and steering column are all in the same space. I'm not sure how the Dolphin gauges are held in the dash, might have to fab a few tabs to hold the in place.