|
Re: pdx-sanity66
I got the tank taken back off and I cleaned up all of the holes I drilled. and started prepping the tank and mounts for painting. I am also going to put another coat of extreme chassis black on the rear frame rails where the tank mounts. They've got kind of beat up during fitting the tank and I also want to cover the bare metal on the new holes I drilled. I also have several parts together that need to be bead blasted and prepped for paint from the tilt column and I got a great deal on a NOS bearing/tilt gear kit on ebay for $10 shipped.
I also got the hole cut in the trans hump for my Lokar shifter. I am using a rectangular boot so I cut a 4"x5 1/4" hole which gives me 2 options for mounting the shifter. I'll post up a picture when I get time.
Next up will be
1) get the gas tank and parts painted and reassembled and new sending unit and fuel line from the filter to the tank installed.
2) overhaul the steering column
3) get the intermediate steering shaft measured, lengthened, and installed
4) seam seal the interior panels
|