|
Re: simple black steel wheels - s10 frame
Several of the full size rear wheel drive GM cars from the late 70's and early 80's ran 15's on a 5 on 4-3/4 bolt pattern.
These are somewhat hard to find off a 76 Cad Seville That I kept after scrapping the Seville.
You could also find a set of rusty but straight chrome reverse rims and have them stripped and then paint them. A bit more work but if you can find a set they should be dirt cheap.
I'm not familiar with any 16 or 17 inch factory plane steelies for rear wheel drive rigs with a 5 on 4-3/4 off hand.
__________________
Founding member of the too many projects, too little time and money club.
My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
Last edited by mr48chev; 12-03-2014 at 12:25 AM.
|