The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Cecil the 1953 5 window / S-10 / 5.7 TPI

oossuuu754 · 12-03-2014, 03:50 PM

SKYMANGS:

"This is how I do the cross member. First I cut the passenger side, then I trim the driver's side to clear the frame rail. I weld 1.25 11ga. Boxed to create a new shelf. Then I trim the passenger side piece I cut off to fit and re-weld it together."

12-03-2014, 03:50 PM	#64
oossuuu754 Registered User Join Date: Jul 2014 Location: Yukon, OK Posts: 395	Re: Cecil the 1953 5 window / S-10 / 5.7 TPI SKYMANGS: "This is how I do the cross member. First I cut the passenger side, then I trim the driver's side to clear the frame rail. I weld 1.25 11ga. Boxed to create a new shelf. Then I trim the passenger side piece I cut off to fit and re-weld it together." Attached Images __________________ ---Shawn Cecil-1953 5 window build thread Skymangs..Chris of Old Sarge customs had a shop fire and was severly injured. To help with the medical bills and expenses a fund has been set up here....http://gofundme.com/c49h5mjx8 More details are here...http://67-72chevytrucks.com/vboard/s...=1#post7253189