The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Project Reno

**cmabolt** · 12-21-2014, 11:03 PM

Well, you only need this if your motor was drive by wire. If it is, then you need the accelerator pedal and tac module from the same vehicle if you can get it. You may
Also research and make sure that you have compatible accelerator pedal and tach module components for your year and model engine. This will save you headaches. Search ls1tech and you will get a ton of info there about your motor.

12-21-2014, 11:03 PM	#323
cmabolt Registered User Join Date: Nov 2007 Location: baltimore, maryland Posts: 617	Re: Project Reno - 72 cheyenne rebuild Well, you only need this if your motor was drive by wire. If it is, then you need the accelerator pedal and tac module from the same vehicle if you can get it. You may Also research and make sure that you have compatible accelerator pedal and tach module components for your year and model engine. This will save you headaches. Search ls1tech and you will get a ton of info there about your motor. __________________ Project Reno Build http://67-72chevytrucks.com/vboard/s...d.php?t=392636 Easier to beg forgiveness than ask permission!