Quote:
Originally Posted by ls1nova71
So how is it wired? What wire did you hook it to?
|
There is 4 wires coming from the lever to control the cruise . One is a 12v momentary . I used this to activate the relays for the light . Then I hooked it to the brake switch to deactivate it when depressed . I got most of my info from a site at 12volt.com .
Once activated by the relay on the left, the relay's coil on the right will stay energized until either ground or 12v(+) is removed.
Momentary to Constant 12v(+) Output Relay Diagram