Quote:
Originally Posted by CUSTOM/10
Jim;
Yes on the heater, but if you had A/C and the water shut off valve then you either needed a by-pass hose or drill holes in the thermostat itself. Most blocks have the water by-pass hole, it's the vortec heads that don't have the water crossover passage in them and you could build steam, over heat the heads and possibly crack a head. So I'm going to put the by-pass hose in, that goes from the intake manifold to the top of the water pump, but my issue is I have no connection on the suction side of the pump for my heater.
Gary
|
Run it to the radiator, like the LS engines do. Your radiator has a port for it.