I'm new here, been lurking here awhile for info. Have always loved the 67-72 c10's and finally had the opportunity to snatch one up. Very little rust, 355 with a th350. Always liked the fleet side trucks but the step side is growing on me. I don't plan on doing anything to the paint.........for now. Just planning on rocking the patina look. Have decided that I want to go with the 20x8.5 and 20x10 boss 338's in gray wrapped in 255/40/20 and 295/40/20's. Will be doing the ECE 4/6 drop with the disc brake kit in the front to 5x5 lug conversion. Found a set of Yukon rear axles for the 69 with the 5x5 conversion as well. Looks like my planned backspacing on the wheels is the 6.23 for the rear and the 5.24 for the front. Anyone see any holes in my plan? Think with the revised back spacing I will be able to squeeze the 338's in there with the narrow 69 axle or will I still need to plan on spacers? Sorry if this has been covered already, I have done some searching, but can always use a nudge in the right direction.
