Quote:
Originally Posted by w00dst0ck
According to all the wiring schematics I've looked at my dizzy is wired correctly all the way to the firewall, minus the junction going down to the starter solenoid? Just curious why this would be a constant power and not switched. I was thinking maybe it had a short or touching a hot wire, but traced it all the way to the ignition switch (I believe, I didn't open up the loom).
|
Since your truck was converted to HEI here's a link that may help you sort out the wiring. There should be a 12 gauge wire from the distributor to an ignition unfused source to replace the original resistor wire to the distributor.
http://67-72chevytrucks.com/vboard/s...d.php?t=431086