Thread
:
72 C10 winter budget build
View Single Post
01-27-2015, 01:22 AM
#
13
c10vortec
Registered User
Join Date: Oct 2014
Location: Bowling Green, Kentucky
Posts: 25
Re: 72 C10 winter budget build
Finishing up the suspension was pretty easy. I measured the old tie rods and set the new MOOG rods at the same length. They needed some adjustment though with the new drop spindles. I discovered I bought a steering box that was too new to use my old P/S lines. I will need to get some unions and change the line ends to the O-ring style, I bought a more recent box for the quicker ratio.
The shocks are less than a year old So I just wiped them off and bolted them back up
After finishing the front up I started mounting up swaybars. I finished the back first. The bar Is a 7/8" bar from the back of an 86 Camaro Z28. I didn't search for an Iroc bar because we have 2 Camaro parts cars. The black frame brackets came from the Camaro. Everything else is Energy Suspension urethane from Autozone. The top holes for the frame brackets were factory holes, After that there was a lot of drilling.
__________________
Dalton
-1972 C10 LS swapped SWB conversion-
http://67-72chevytrucks.com/vboard/s...d.php?t=657591
-2004 Chevy 1500 swb daily driver
c10vortec
View Public Profile
Find More Posts by c10vortec