The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 1969 c10 build, input needed. Boss 338's, ECE 4/6 drop

Firefighterkk · 02-01-2015, 05:18 PM

Finished up the c notch and rear suspension Friday after getting the 72 rear axle under neath it. Started in on the front. Still on disassembly up there. Did pull the steering parts and brake parts off the 72 parts truck. I ended up going with the 4.5/6 cpp drop, the guy that I ordered the 338's from is a cpp dealer so that made things easier. Weighed out my options on building my own mounts or just doing bolt in and decided to go with the cpp ls swap kit, figured for the money it couldn't be beat. Hope to have front drop on and motor sitting in truck by the end of the week.

02-01-2015, 05:18 PM	#14
Firefighterkk Registered User Join Date: Jan 2015 Location: Miami Oklahoma Posts: 54	Re: 1969 c10 build, input needed. Boss 338's, ECE 4/6 drop Finished up the c notch and rear suspension Friday after getting the 72 rear axle under neath it. Started in on the front. Still on disassembly up there. Did pull the steering parts and brake parts off the 72 parts truck. I ended up going with the 4.5/6 cpp drop, the guy that I ordered the 338's from is a cpp dealer so that made things easier. Weighed out my options on building my own mounts or just doing bolt in and decided to go with the cpp ls swap kit, figured for the money it couldn't be beat. Hope to have front drop on and motor sitting in truck by the end of the week.