Quote:
Originally Posted by par4tom
I'm ordering my kit tomorrow. Thanks for a great post.
Would you use the same exact sway bar again. One a bit wider, narrower?
Tom
|
I would use the same Swaybar over again...in my case it was just the right width.
Its application is for a 1975 C-10-20, the Addco 117 is rather a universal style than the stock style one on my 75 C-20. I realized that this style would actually work better on my 62 using the supplied angle attachments on the lower A arms. All I really had to figure out is the spacer block thickness to clear the bumper bracket edges and steering gear box as the Swaybar moves up and down.
You might not need the spacer blocks if you have the stock steering box and the bumper brackets can be trimmed with out issues. You would just have to see mocking it up.
Its a no-brainer and easy to do now that I have done one....Joe