Have about everything on order, including the harness and computer tune. Just waiting on rear wheels to come off back order. Lots of little details to wrap up.
Started plumbing fuel lines tonight. I want to eventually go with a new tank in between the frame rails, but the tank behind the seat will work for now considering the previous owner just installed it.
Took the sending unit out and cut the pickup tube off and slid a walbro 255 in tank pump on. Wired it all up, used an isolater off another sending unit to get power into the tank. I think it turned out pretty good, besides the jb weld that I had to use to seal the return line I setup.
Still need to plumb tranny cooler lines, but should be ready to fire it as soon as the harness shows up.