Re: bell crank z-bar stud issue
The block should be threaded as 1/2"/13 NC...you might try screwing a 1/2" coarse thread nut on the onto the ball stud, see if it binds also? longhorn
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....
|