The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Bangkok Dean · 02-20-2015, 01:34 AM

My original wheels that were beat up

Then I bought these but I could not lower the truck,no fender clearance.

So after not finding wheels that I liked and would clear the front fenders I bought new 18inch wheels for my C3 corvette.

The front wheels on the Corvette were 17X8 so I machined the centers out of the front alunimum TT II and moved the centers out to the edge then after a good polish the fronts clear just fine.
The rear 17X9 from the Corvette fit as ther were.

02-20-2015, 01:34 AM	#148
Bangkok Dean Registered User Join Date: Mar 2014 Location: Bangkok Thailand Posts: 101	Re: Show off your Wheels My original wheels that were beat up Then I bought these but I could not lower the truck,no fender clearance. So after not finding wheels that I liked and would clear the front fenders I bought new 18inch wheels for my C3 corvette. The front wheels on the Corvette were 17X8 so I machined the centers out of the front alunimum TT II and moved the centers out to the edge then after a good polish the fronts clear just fine. The rear 17X9 from the Corvette fit as ther were.