I picked up the "poor man's serpentine kit" which uses two 6-rib belts instead of one, but is significantly cheaper (March Performance P/N# 22061)
So I started pressing the P/S pump pulley on while loosely mounted...
And realized there is no way I'm going to be able to get this bolt in with it on the truck
So off it comes and I need some shorter bolts... hold that until tomorrow I guess.
This may be overkill, but I'm doing hydroboost
And I picked up a PSC remote reservoir, pump housing and bracket (PSC P/N# SR2545-10K, SR146H-6-10, MR18K)
Going to be a tight fit
Stock photo of bracket which DOES NOT fit. I might go back and order one of
these, which I didn't see before. Their site is really hard to navigate.
And lastly, my next proximity issue