The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

clinebarger · 04-19-2015, 09:31 PM

I started to get a engine harness built.

I have a '02 F-body T56 harness, I was going to add the 4L60E & DBW controls to it...Simple, Right? The harness is in very bad shape. The Texas sun had baked it at one point in time? The connector locks are rock hard & had insulation damage & bleaching from UV exposure.

Then I got the bright idea of modifying the 5.3L truck harness to mimic a F-body harness......Wrong! The routing is to far off, That is putting it lightly!

My F'ed-up F-Body harness...

04-19-2015, 09:31 PM	#45
clinebarger Senior Member Join Date: May 2009 Location: Fort Worth, TX Posts: 6,370	Re: '04 5.3L in a '01 V6 Camaro. I started to get a engine harness built. I have a '02 F-body T56 harness, I was going to add the 4L60E & DBW controls to it...Simple, Right? The harness is in very bad shape. The Texas sun had baked it at one point in time? The connector locks are rock hard & had insulation damage & bleaching from UV exposure. Then I got the bright idea of modifying the 5.3L truck harness to mimic a F-body harness......Wrong! The routing is to far off, That is putting it lightly! My F'ed-up F-Body harness... Attached Images Last edited by clinebarger; 04-19-2015 at 11:18 PM.