Quote:
Originally Posted by DWilbur
Mine ran down to the left frame rail crossed over fallowing the front cross member to the right side. I don't have pictures you are ahead of me installing the break lines.
|
Left as the driver side? my frame has the rear hard line bracket on the passenger side. I think I am going to remove and install the bracket that came on the 91 burb frame I bought. the line I have looks to stop about where the original engine crossmember was. I thought the lines ran across the very forward crossmember (where the steering brace attaches).
As far as installing the brake lines I figured since I was doing the rearend I might as well get the line to the front of the frame.
The rear caliper hose ends have 3/8"-24 female inverted size and the brake line kit has 7/16-24.So I had to pick up the correct fittings, but since I have to cut them down and re-flare its no big deal.
__________________
1956 Chevy Bel Air 2 door
1956 Chevy 210 4 Door
1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E
HULK BUILD
1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E
1968 K10 LWB Dark green my son calls it "THE HULK Jr"
HULK JR *SOLD*
GO
GO!!!