The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

naphtali5725 · 04-27-2015, 08:26 PM

thought i'd share some pics of my high horsepower Olds 455 engine build, this is not the engine i just put in the truck, that is built with stock parts(rods/pistons etc.)...

new Olds 455 short block specs:
Block bored .025 over for Pontiac Icon pistons
Scat 7.00" H Beam rods
"N" crank
Balanced
ARP main studs
Align honed
Square decked
Bored and honed
Block dressed and relieved
Federal Mogul Race Main bearings
Clevite rod bearings
Durabond Cam bearings
Mahle Moly Top ring set - file fit.
Cloyes Billet timing set.

Cam - 232/236@.050 on a 110. I'll put it in at 106... will have gobs of torque and some tone. Lift is .568 on both INT/EXH

more pics as i get them from the builder

04-27-2015, 08:26 PM	#617
naphtali5725 Registered User Join Date: Mar 2012 Location: NC Posts: 1,101	Re: My new project 86 Silverado thought i'd share some pics of my high horsepower Olds 455 engine build, this is not the engine i just put in the truck, that is built with stock parts(rods/pistons etc.)... new Olds 455 short block specs: Block bored .025 over for Pontiac Icon pistons Scat 7.00" H Beam rods "N" crank Balanced ARP main studs Align honed Square decked Bored and honed Block dressed and relieved Federal Mogul Race Main bearings Clevite rod bearings Durabond Cam bearings Mahle Moly Top ring set - file fit. Cloyes Billet timing set. Cam - 232/236@.050 on a 110. I'll put it in at 106... will have gobs of torque and some tone. Lift is .568 on both INT/EXH more pics as i get them from the builder Attached Images __________________ My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy Last edited by naphtali5725; 04-27-2015 at 08:41 PM.