The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

LeRoy · 02-08-2004, 10:54 PM

Offroad Design has the zero rates. I think the shackle reversal would net to much lift. Supposed to be around 4" or so. If you need more then 1" lift you could also add a block. The zero rates bolt to the spring so you can double if wanted. One other thing I've done was double up on the overload springs. On average the overload is 3/4" think so with a zero rate you could get 1 3/4" lift without effecting the ride

02-08-2004, 10:54 PM	#7
LeRoy Registered truck nut Join Date: Dec 1999 Location: Mt. Vernon, Washington, USA Posts: 1,584	Offroad Design has the zero rates. I think the shackle reversal would net to much lift. Supposed to be around 4" or so. If you need more then 1" lift you could also add a block. The zero rates bolt to the spring so you can double if wanted. One other thing I've done was double up on the overload springs. On average the overload is 3/4" think so with a zero rate you could get 1 3/4" lift without effecting the ride __________________ MOUNT VERNON, WASH. STATE Need a part? Just PM me Last edited by LeRoy; 02-08-2004 at 11:03 PM.