Re: Need help with truck 60'
I see:
First pass - Very little weight transfer but still hooked
Second pass - It spun with little weight transfer
Third pass - It spun with little weight transfer
Comments/Questions:
I feel your spring rates are too stiff both front and back.
-I can't find the advertised spring rate on the moog PN, but they are not known to make springs with a lot of stored energy (think long light spring rate)
-200lb rear spring on a coil over?
-Can you provide the QA1 shock part number
-What length spring?
-Where is the ride height adjuster nut on the shock body, towards the bottom of the thread or towards the top?
-Where is the rear shock in relationship to travel? Centered or 75% out?
-What are the "recommended" settings? How loose/stiff?
-What is the height of the front lower control arm bolt?
-Any idea what the truck weighs both front and back?
__________________
------Motor---------------Bottle
60'---1.53---------------1.41
1/8---6.58 @ 105.92----5.87 @ 118.41
1/4---10.38 @ 126.97----9.24 @ 142.49
|