[youngrodder]

Well I spent a good portion of last Sunday in the garage as well as today. I was able the get the floor out. The problem that I ran into was the rusted carriage bolts that held the wood in around the perimeter. The nuts were rusted and the bolts simply spun. I ended up spot welding each one so that they would not spin. I also removed the rear sill. I was not certain how this was to come out after snapping the heads off of about 12 bolts and cutting a few spot welds I was able to easy it out. I needed to remove it to properly replace the rear driver side cab corner. Here are some pics to prove it.