[xpickup]

Advanced Design, Yes it was a good day with nice weather, thank you.

Oldman3 , thank you

Solidaxel, thank you. No it is an ez wire kit. I usually alway use them, plus they are cheap. The wires are marked every 12" and gm color coded.

Rickysnickers, thank you.

99 to life, thank you.

48 GMC BURB, thank you. Yes I know on the column drop. At least you can see the bottom of it! I had to keep playing with the column place to get it right. I had to change the lower mount enough that now I need a 3rd joint and a stand off. Setting g in the seat everything sets great.

I did a bunch yesterday on the truck. Finished welding in the patch panel and ground it all up. Need to stud gun it at the bottom to pull it out a little, but other than that it is way better than before and no deep lead joint . Then it was time to work on the drivers side exhaust cut out. Got the fender all cut and hole sawed out the header, then set my tube and cut it to the profile of the header. Then glued it in. Looks just like the other side now. Then worked on a bunch of small stuff but nothing picture worthy.

Shannon