The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - PDF of Square Schematics & GM Training Manuals

frankyjoet · 10-22-2015, 08:53 PM

hatzie, this is wonderful and will help me with now and future problems. thank you so much. my ride is a newly painted 3 stage paint midnite blue with pearl as 2nd stage. job done by me in my garage with an air compressor. 2 harbor freight hvlp guns. not bad for a novice. 73 gmc 3/4 ton 4 spd saginaw 350 bored out to 4.0 engine redone by a mechanic my neighbor. i did learn to reground the valves new valve stems. Added new piston (concave type) new roller rockers an rv cam crank was serviced. heads not touched. engine has to be broken in. has about 3 miles driven around the block. Added all kinds of after market items edlebrk carb intake man and hders from ebay. thanks again frankyt.

10-22-2015, 08:53 PM	#141
frankyjoet Registered User Join Date: Feb 2008 Location: Surprise, Ariz. Posts: 186	Re: PDF of Square Schematics & GM Training Manuals hatzie, this is wonderful and will help me with now and future problems. thank you so much. my ride is a newly painted 3 stage paint midnite blue with pearl as 2nd stage. job done by me in my garage with an air compressor. 2 harbor freight hvlp guns. not bad for a novice. 73 gmc 3/4 ton 4 spd saginaw 350 bored out to 4.0 engine redone by a mechanic my neighbor. i did learn to reground the valves new valve stems. Added new piston (concave type) new roller rockers an rv cam crank was serviced. heads not touched. engine has to be broken in. has about 3 miles driven around the block. Added all kinds of after market items edlebrk carb intake man and hders from ebay. thanks again frankyt. Last edited by frankyjoet; 10-22-2015 at 08:57 PM. Reason: left something out.