Quote:
Originally Posted by Captainfab
If you want to run the Wilwood dual piston D52 calipers you simply need the Calipers with the 1.25" diameter pistons for the 1.28" thick rotors in your choice of color.
Here is Wilwood's website.
http://www.wilwood.com/Calipers/Cali...spx?subname=GM D52 Dual Piston |
So with your bracket I can run that setup on the rear. Is the front rotor the same thickness? Will the d52 caliper with 1.25 diameter pistons bolt up to the front as well with no problem? Or is the rotor different then 1.28 or bolt pattern different?