|
Re: My caster mod (with pictures)
Quote:
Originally Posted by crakarjax
I got my bag mocked up, but it looks like it'll have stress in bad places. Then again, I've never run bags. Anyone know if the offset pictured will cause more than a marginal decrease in bag life? I also have no idea what the internal bumpstops on these bags look like. I'm a little worried that they aren't making solid contact as pictured.
|
I made my own upper plates & shifted the mounting holes forward when I did the caster mod for my lowers. I then had to shift them back (drill more holes) when I swapped in the PB lowers.
I would make new uppers or re-drill the holes accordingly to keep the bag as straight as possible @ ride height.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|